The following are a list of features and benefits for the 980 HDMI 2.0 Video Analyzer module.

HDMI 2.0 Analyzer – Analyzes HDMI streams from source devices. Supports analysis of HDMI 3D and deep color source content at HDMI character rates up to 600MHz with TMDS rates up to 6.00Gb/s (per pair).

Real Time monitoring mode – View the HDMI metadata and HDMI DDC traffic in real time through the new Real Time monitoring mode.

Data Island Decoding – Decodes all data island types. Data collected includes: General Control Packets, AVI and Audio Infoframes, Vendor Specific Data with 3D content, Source Product Descriptor, Audio Clock Regeneration, Audio Sample packets—including the decoding of the Channel Status Bits and the control bits.

DDC Data Decoding – Decodes all HDMI DDC transactions including EDID reads and HDCP 1.4 and 2.2 authentication.

Triggering and Precapture Filtering – Set up triggers on data island packet values as well as timing and control events. Use precapture filtering to capture the specific data you need.

Filtering of Data Transactions – Check box filtering allows you to remove data types from view that you are not interested in. Filter out all data islands except audio sample packets and audio infoframes, for example, to compare the respective values for sampling rate.

Searching Through Data – Search through the captured data to locate the specific occurrence of the data and or events you are interested in.

Timing Analysis – Verify timing parameters from HDMI source devices including all horizontal and vertical parameters and pixel clock. The timing values are compared against a set of standard timings and any deviation is indicated.

Data Portability – Data portability enables you to share capture data and compliance test results with colleagues, subject matter experts at other corporate locations and other experts for analysis and for verifying compliance. The 980 test instrument is not required to view the test results. The data can be viewed through the 980 GUI Manager which is free and available from the Quantum Data website.

Audio Analysis – Verify audio metadata and identify inconsistencies that could result in interoperability problems.

Pixel Values – View the component color values for any pixel including deep color video.

Built-in touch screen display – Enables you to control the 980 directly through the 980 built-in color touch screen display.

 

The following are a list of options available for the HDMI 2.0 Protocol Analyzer module.

Monitoring of DDC Transactions – Monitor the HDCP 1.4 or HDCP 2.2 transactions and EDID exchanges on the DDC while the 980 HDMI 2.0 Protocol Analyzer is emulating a known-good HDMI 2.0 sink device.

HDMI 2.0 Source Compliance Test Package #3 – Tests HDMI source devices for compliance to Sections 7.2 (Protocol), Section 7.4 (Timing) and Section 7.7 (AVI InfoFrame) of the HDMI 2.0 CTS.

 

 

The 980 HDMI 2.0 Protocol Analyzer module supports HDMI Forum-approved compliance testing for HDMI 2.0 source tests at pixel rates over those supported in HDMI 1.4 up to 600MHz. The compliance tests are ideal for pre-testing your product prior to submission to an Authorized Test Center (ATC) for approval. Pre-testing provides added assurance that your product will pass on the first submission to the ATC. Where permitted, the 980 HDMI 2.0 Protocol Analyzer can be used to self-test your HDMI 2.0 product. Self-testing offers even greater benefits for time to market and cost reduction than pre-testing. The instrument provides all the necessary raw data test results to demonstrate compliance. The following are a list of compliance tests supported by the HDMI 2.0 Protocol Analyzer module.

HDMI 2.0 Compliance Test Support

• Section 7.2 Source TMDS Protocol, Test IDs supported: HF1-11, HF1-12, HF1-13, HF1-21, HF1-22.
• Section 7.4 Source Timing Tests, Test IDs supported: HF1-14, HF1-15, HF1-16, HF1-24, HF1-25, HF1-35.
• Section 7.7 Source AVI InfoFrame, Test IDs supported: HF1-18, HF1-28.

 

 

The following is a list of some of important specifications of the 980 HDMI 2.0 Protocol Analyzer module. Please refer to the 980 HDMI 2.0 Protocol Analyzer Data Sheet for a list of all features, benefits, options and specifications.

Interfaces

• HDMI Rx Max TMDS Character rate: Up to 600MHz.
• HDMI Rx Video Encoding/Sampling modes: RGB, YCbCr 4:4:4, 4:2:2, 4:2:0.
• HDMI Rx Color Depth: 24/30/36 bit color.
• HDMI Rx Colorimetry: ITU-R BT.601-5, ITU-R BT.709-5.
• HDMI Rx Audio Formats: LPCM, Dolby (DD, DD+, TrueHD); DTS (ES, HD, Master Audio).
• HDMI Rx Capture memory: 4 GBytes.
• HEAC HDMI Ethernet Channel and Audio Return Channel Connector: RJ-45.